Honda 2004 Odyssey Service Manual page 280

10. Install the intake air duct (A), then install the
vacuum hose(s) (B) and breather pipe (C).
1999-2001 models:
C
D
2002-2004 models:
A
D
11. Install the EVAP canister hose (D) (1999-2001
models) or vacuum hose (D) (2002-2004 models).
A
B
B
C
12. Install the ignition coil cover(s) (A) and intake
manifold cover (B).
1999-2001 models:
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
A
2002-2004 models:
B
13. Clean up any spilled engine coolant.
14. After installation, check that all tubes, hoses and
connectors are installed correctly.
15. Refill the radiator with engine coolant, and bleed
air from the cooling system with the heater valve
open (see step 8 on page 10-13).
B
A
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
A
9-9