Honda 2004 Odyssey Service Manual page 278

Installation
1. Put the gasket and spacer on the injector base
(2002-2004 models).
2. Install the intake manifold. Tighten the bolts and
nuts sequentially in two or three steps. Always use a
new intake manifold gasket.
Specified torque:
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
1999-2001 models:
2002-2004 models:
3. Install the upper cover. Tighten the bolts and nuts
sequentially in two or three steps. Always use a
new intake manifold gasket (2002-2004 Models).
Specified torque:
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
(cont'd)
9-7