Show Service-Acl Interface; Show Access-Lists Interface - Dell Networking 2024 Reference Manual

show service-acl interface

This command displays the status of LLPF rules configured on a particular
port or on all the ports.
Syntax
show service-acl interface {
•
interface-id—Any
Conventions
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show service-acl interface gi1/0/1
Block CDP................................ Enable
Block VTP.................................Enable
Block DTP..................................Enable
Block UDLD................................ Enable
Block PAGP.................................Enable
Block SSTP................................ Enable
Block All................................. Enable

show access-lists interface

Use the show access-lists interface command in Privileged EXEC mode to
display interface ACLs.
Syntax
show access-lists interface
• interface-id —
274
ACL Commands
interface-id
physical or logical
for interface representation.
interface-id
The interface identifier (physical, port-channel, or VLAN).
| all}
interface. See Interface Naming
{in | out} | control-plane