Dell Networking 2024 Reference Manual page 250

If the successful authentication method does not provide an Administrative
Profile for a user, then the user is permitted access based upon the user's
privilege level (as in previous releases). This means that if a user successfully
passes enable authentication, the user is permitted access to all commands.
This is also true if none of the Administrative Profiles provided are configured
on the switch.
RADIUS and TACACS+
The network administrator may configure a custom attribute to be provided
by the server during authentication. The RADIUS and TACACS+
applications process this custom attribute and provide this data to the User
Manager for configuring the user profile.
The custom attribute is defined as:
cisco-av-pair=shell:roles="roleA roleB ..."
NOTE: If an "*" is used instead of an "=", the attribute is considered optional and
devices which do not support this attribute will ignore it.
Commands in this Chapter
This chapter explains the following commands:
admin-profile
description (Administrative Profile
Configuration)
rule
250
Administrative Profiles Commands
show admin-profiles
show admin-profiles brief
show cli modes