Show Slot - Dell Networking 2024 Reference Manual

show slot

Use the show slot command in User EXEC mode to display information
about all the slots in the system or for a specific slot.
Syntax
slot/port
show slot [
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Configuration mode and all Configuration submodes
User Guidelines
The following table explains the output parameters.
Parameter
Slot
Slot Status
Admin State
Power State
Configured Card Model Identifier
Pluggable
If you supply a value for slot/port, the following additional information
appears as shown in the table below.
]
Description
The slot identifier in a slot/port format.
The slot is empty, full, or has encountered
an error.
The slot administrative mode is enabled
or disabled.
The slot power mode is enabled or
disabled.
The model identifier of the card
preconfigured in the slot. Model identifier
is a 32-character field used to identify a
card.
Cards are pluggable or non-pluggable in
the slot.
System Management Commands
1709