Time Ranges Commands - Dell Networking 2024 Reference Manual

Time Ranges Commands

Dell Networking N2000/N3000/N4000 Series Switches
Time ranges are used with time-based ACLs to restrict their application due
to specific time slots.
This chapter explains the following commands:
time-range
absolute
time-range
Use the time-range command in Global Configuration mode to globally
enable or disable the event notification service of the time range component.
If disabled, ACLs using time ranges are not started.
Use the optional
absolute time entry and/or one or more periodic time entries. If a time range
by this name already exists, this command enters Time-Range Configuration
mode to allow updating the time range entries.
Use the no form of the command to disable the event notifciation service.
Use the no form of this command with the optional
a time-range identified by
Syntax
name ]
time-range [
name ]
no time-range [
name —A case-sensitive alphanumeric string from 1 to 31 characters
•
uniquely identifying the time range. An alpha-numeric string is defined as
consisting of only alphabetic, numeric, dash, underscore, or space
characters.
Default Configuration
Time range event notification is enabled by default.
name parameter to create a time range consisting of one
name .
periodic
show time-range
name parameter to delete
Time Ranges Commands
82
1751