Show Memory Cpu; Show Interfaces Utilization - Dell Networking 2024 Reference Manual

show interfaces utilization

Use this command to display interface utilization.
Syntax
show interfaces utilization [
interface-id —The physical or port-channel interface.
•
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode
User Guidelines
This command displays the interface transmit and receive utilization in
bits/sec and packets/sec.
Example
console#show interfaces utilization
Port Interval Rx bits/s
--------- -------- --------------- -------------- --------------- ----------
Gi1/0/1 150
Gi1/0/2 300
Gi1/0/3 300
Gi1/0/4 300
Gi1/0/5 300
console#show interfaces utilization gigabitethernet 1/0/1
Port Interval Rx bits/sec
--------- -------- --------------- -------------- --------------- ----------
Gi1/0/1 150

show memory cpu

Use the show memory cpu command to check the total and available RAM
space on the switch.
interface-id
Rx packets/s
52889696 103299
0 0
0 0
0 0
856 2
Rx packets/s
12205152 23835
]
Tx bits/s
1968
36175328
0
0
37785736
Tx bits/s
4568
System Management Commands
Tx packets/s
4
70654
0
0
73799
Tx packets/s
8
1703