Show Ip Telnet - Dell Networking 2024 Reference Manual

Syntax
port number
ip telnet port
port number — Telnet TCP port number (Range: 1025–65535)
•
Default Configuration
The default value for the Telnet TCP port is 23.
Command Mode
Global Configuration
User Guidelines
The Telnet server TCP port should not be set to a value that might conflict
with other well-known protocol port numbers used on this switch.
Example
console(config)#ip telnet port 1045
console(config)#no ip telnet port

show ip telnet

The show ip telnet command displays the status of the Telnet server and the
Telnet TCP port number.
Syntax
show ip telnet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
Example
(console)#show ip telnet
Telnet Server is Enabled. Port:23
1748
Telnet Server Commands