User Group - Dell Networking 2024 Reference Manual

Syntax
show captive-portal user [
user-id — User ID (Range: 1–128).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
User ID
------- --------------------- ------- ------------ ------------
1 user123
2 user234
console#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Group ID
-------- --------------------------------
1 Default
2 group2

user group

Use the user group command to associate a group with a captive portal user.
Use the "no" form of this command to disassociate a group and user. A user
must be associated with at least one group so the last group cannot be
disassociated.
1416
Captive Portal Commands
user-id
Session
User Name Timeout
14400
0
Group Name
]
Group ID
1
1
2
Group Name
Default
Default
group2