Show Rmon Events - Dell Networking 2024 Reference Manual

----------------------------------------------------------
1 1/0/1
2 1/0/1

show rmon events

Use the show rmon events command in User EXEC mode to display the
RMON event table. Also see the
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The following table describes the significant fields shown in the display:
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the case
of log, an entry is made in the log table for each event. In the case of
trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
Samples
30 50
1800 50
rmon event
Samples
50 CLI
50 Manager
command.
RMON Commands
1549