Debug Clear; Debug Auto-Voip - Dell Networking 2024 Reference Manual

debug auto-voip

Use the debug auto-voip command to enable Auto VOIP debug messages. se
the optional parameters to trace H323, SCCP, or SIP packets respectively. Use
the "no" form of this command to disable Auto VOIP debug messages.
Syntax
debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]
Default Configuration
Auto VOIP tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#debug auto-voip

debug clear

Use the debug clear command to disable all debug traces.
Syntax
debug clear
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
1568
Serviceability Tracing Packet Commands