Debug Authentication Interface - Dell Networking 2024 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console#debug arp

debug authentication interface

Use this command to enable Authentication Manager debug traces for the
interface.Use the no form of this command to set the debug trace to factory
default value.
Syntax
debug authentication {event | all}
no debug authentication {event | all}
• event—Traces Authentication Manager debug events.
• all—Enables all Authentication Manager debugs.
interface-id —The interface to trace.
•
Default Configuration
Default value is disabled.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console# debug authentication event Gi1/0/1
console# debug authentication all Gi1/0/1
interface-id
interface-id
Serviceability Tracing Packet Commands
1567