Global Configuration Mode - Dell Networking 2024 Reference Manual

ospf—Enable OSPF event traps.
•
ospfv3—Enable OSPFv3 event traps.
•
• pim—Enable pim traps (pim-sm and pim-dm).
• poe —Enable poe traps.
• snmp authentication —Enable snmp authentication traps.
• spanning-tree—Enable traps on topology changes.
• stack—Enable stack firmware synchronization traps.
• vrrp —Enable vrrp traps.
Default Configuration
SNMP authentication, link, multiple-user, spanning-tree, dot1q, mac lock
violation, and ACL traps are enabled by default.
Command Mode

Global Configuration mode.

User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps
command.
console(config)#snmp-server enable traps ?
aclEnable/Disable traps for Access Control Lists.
all Enable/Disable all Traps.
auto-copy-sw Enable/Disable auto copy of code if there is a version mismatch
captive-portalEnable/Disable SNMP traps for CP system events.
dot1q Enable/Disable switch level Dot1q trap flag.
dvmrp Enable/Disable traps for Distance Vector Multicast Routing Protocol.
link Enable/Disable switch level Link Up/Down trap flag.
maclock Enable/Disable switch level Maclock Violation trap flag.
multiple-usersEnable/Disable sending traps when multiple logins active.
ospfEnable/Disable OSPF Traps.
ospfv3Enable/Disable OSPFv3 Traps.
pimEnable/Disable traps for Protocol-Independent Multicast.
spanning-treeEnable/Disable sending Spanning Tree traps.
1622
SNMP Commands