Snmp-Server Group - Dell Networking 2024 Reference Manual

Hide thumbs Also See for Networking 2024:

Table of Contents

Default Configuration

No filter entry exists.

Command Mode

Global Configuration mode

User Guidelines

An SNMP server filter identifies the objects to be included or excluded from

notifications sent to a server per RFC 2573 Section 6 "Notification Filtering."

This command can be entered multiple times for the same filter record. Later

lines take precedence when an object identifier is included in two or more

The filter name may include any printable characters except a double quote

or question mark. Enclose the string in double quotes to include spaces

within the name. The surrounding quotes are not used as part of the name.

The CLI does not filter illegal characters and may accept entries up to the

first illegal character or reject the entry entirely. Per RFC 2573, configuring a

filter adds an implicit exclude-all as the first entry in a filter record. Unless an

include statement is specified, all notifications are excluded by default.

The following example creates a filter that includes all objects in the MIB-II

system group except for sysServices (System 7) and all objects for interface 1

in the MIB-II interfaces group.

console(config)# snmp-server filter user-filter system included

console(config)# snmp-server filter user-filter system.7 excluded

console(config)# snmp-server filter user-filter ifEntry.*.1 included

snmp-server group

Use the snmp-server group command in Global Configuration mode to

configure a new Simple Management Protocol (SNMP) group or a table that

maps SNMP users to SNMP views. To remove a specified SNMP group, use

the no form of this command.

SNMP Commands

Table of Contents