Show Captive-Portal - Dell Networking 2024 Reference Manual

port-num —The port number on which the HTTPS server listens for
•
connections (Range: 1025–65535).
Default Configuration
Captive portal listens on port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
The port number should not be set to a value that might conflict with other well-
known protocol port numbers used on this switch.
Example
console(config-CP)#https port 1443
console(config-CP)#no https port

show captive-portal

Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal
1400
Captive Portal Commands