Show Snmp User - Dell Networking 2024 Reference Manual

----------------- -----
user-group
managers-group
managers-group
console# show snmp groups user-group
Name
----------------- ------
user-group

show snmp user

Use the show snmp user command in Privileged EXEC mode to display the
configuration of users.
Syntax
show snmp user [
username — Specifies the name of the user. (Range: 1-30)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The user name accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the name. The CLI
does not filter illegal characters and may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following example displays the configuration of users with the user name
specified.
1614
SNMP Commands
Model Level
------
V3 Auth-Priv
V3 NoAuth-priv
V3 NoAuth-priv
Security
Model Level
------
V3 Auth-Priv
username
]
Read Write
-------- -------- ------
Default ""
Default Default
Default ""
Views
Read Write
-------- -------- -------
Default ""
Notify
""
""
""
Notify
""