Clear Power Inline Statistics; Power Inline Usage-Threshold - Dell Networking 2024 Reference Manual

power inline usage-threshold

The power inline usage-threshold command configures the system power
usage threshold level at which lower priority ports are disconnected. The
threshold is configured as a percentage of the total available power. Use the
no form of the command to set the threshold to the default value.
Syntax
power inline usage-threshold
no power inline usage-threshold
threshold — Power threshold at which ports are disconnected. The range is
•
1-99%.
Default Configuration
The default threshold is 90%.
Command Mode
Global Configuration.
User Guidelines
The power limit beyond which ports are disconnected has a configurable
range as a percentage of total available power. The maximum power available
is given in the table shown in the power inline management command. When
ports are disconnected due to the threshold being exceeded, a trap is
generated.
Examples
console(config)# power inline usage-threshold 90

clear power inline statistics

Use this command to clear the PoE statistics.
Syntax
clear power inline statistics
interface identifier —A physical interface capable of supplying PoE power.
•
threshold
interface identifier
Power Over Ethernet Commands
1535