Snmp-Server Community-Group - Dell Networking 2024 Reference Manual

Example
The following example configures community access string public to permit
administrative access to SNMP at an administrative station with IP address
192.168.1.20.
console(config)# snmp-server community public su ipaddress 192.168.1.20

snmp-server community-group

Use the snmp-server community-group command in Global Configuration
mode to map the internal security name for SNMP v1 and SNMP v2 security
models to the group name. To remove the specified community string, use
the no form of this command.
Syntax
snmp-server community-group
address
]
• community-string — Community string that acts like a password and
permits access to the SNMP protocol. (Range: 1-20 characters)
group-name — Name of a previously defined group. The group defines the
•
objects available to the community. (Range: 1-30 characters)
• ip-address — Management station IP address. Default is all IP addresses.
Default Configuration
No community group is defined.
Command Mode
Global Configuration mode
User Guidelines
group-name
The
community string. When it is specified, the software:
• Generates an internal security-name.
• Maps the internal security-name for SNMPv1 and SNMPv2 security
models to the group-name.
community
parameter can be used to restrict the access rights of a
string group-name
-
SNMP Commands
ip-
[ipaddress
1619