Captive Portal Status Commands; Show Captive-Portal Configuration - Dell Networking 2024 Reference Manual

timeout —Session timeout. 0 indicates use global configuration (Range:
•
0–86400 seconds).
Default Configuration
The global session timeout is used by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user 1 session-timeout 86400
console(config-CP)#no user 1 session-timeout

Captive Portal Status Commands

show captive-portal configuration

Use the show captive-portal configuration command to display the
operational status of each captive portal configuration.
Syntax
show captive-portal configuration
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
1420
Captive Portal Commands
cp-id