Show Captive-Portal Interface Client Status - Dell Networking 2024 Reference Manual

Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name
----- --------------- ------------------ ----------------- ---------
1 cp1
2 cp2
3 cp3
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client
MAC Address
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

show captive-portal interface client status

Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
Syntax
show captive-portal interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port} client
status
Default Configuration
There is no default configuration for this command.
1412
Captive Portal Commands
Client MAC Address Client IP Address Interface
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
0002.BC00.1293
Client
IP Address Interface
1/0/1
1/0/2
10.254.96.47
10.254.96.48
10.254.96.49
10.254.96.50
Interface Description
Unit: 1 Slot: 0 Port: 1 Gigabit
Unit: 1 Slot: 0 Port: 2 Gigabit
1/0/1
1/0/2
1/0/3
1/0/4