The Service Group Summary Screen; The Service Group Add/Edit Screen - ZyXEL Communications UAG4100 User Manual

34.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition, this
screen allows you to add, edit, and remove service groups.
To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service Group.
Figure 220 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See
information as well.
Table 159 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Description

34.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or edit an existing
one. To access this screen, go to the Service Group screen (see
click either the Add icon or an Edit icon.
Chapter 34 Services
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
use the entry. See Section 10.3.2 on page 123
This field is a sequential value, and it is not associated with a specific service group.
This field displays the name of each service group.
By default, the UAG uses services starting with "Default_Allow_" in the firewall rules to
allow certain services to connect to the UAG.
This field displays the description of each service group, if any.
UAG4100 User's Guide
329
Section 34.3.1 on page 329
for an example.
Section 34.3 on page
for more
329), and