The Service Group Add/Edit Screen - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 42 Services

42.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or
edit an existing one. To access this screen, go to the Service Group screen (see
Section 42.3 on page
Figure 502 Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 210 Configuration > Object > Service > Service Group > Edit
LABEL
Name
Description
Member List
OK
Cancel
750
748), and click either the Add icon or an Edit icon.
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60
printable ASCII characters.
The Member list displays the names of the service and service group
objects that have been added to the service group. The order of
members is not important.
Select items from the Available list that you want to be members and
move them to the Member list. You can double-click a single entry to
move it or use the [Shift] or [Ctrl] key to select multiple entries and use
the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
ZyWALL USG 300 User's Guide