The Ssl Global Setting Screen - ZyXEL Communications ZyWALL USG 200 Series User Manual

Table 137 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL
SSL Application
List (Optional)
Network
Extension
(Optional)
Enable Network
Extension
Assign IP Pool
DNS/WINS
Server 1..2
Network List
OK
Cancel

26.3 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following
screen. Use this screen to set the IP address of the ZyWALL (or a gateway device)
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
The Selectable Application Objects list displays the name(s) of the
SSL application(s) you can select for this SSL access policy.
To associate an SSL application to this SSL access policy, select a name
and click >> to add to the Selected Application Objects list. You can
select more than one application.
To remove an SSL application, select the name(s) in the Selected
Application Objects list and click <<.
Select this option to create a VPN tunnel between the authenticated
users and the internal network. This allows the users to access the
resources on the network as if they were on the same local network.
Clear this option to disable this feature. Users can only access the
applications as defined by the selected SSL application settings and the
remote user computers are not made to be a part of the local network.
Define a separate pool of IP addresses to assign to the SSL users. Select
it here.
The SSL VPN IP pool cannot overlap with IP addresses on the ZyWALL's
local networks (LAN and DMZ for example), the SSL user's network, or
the networks you specify in the SSL VPN Network List.
Select the name of the DNS or WINS server whose information the
ZyWALL sends to the remote users. This allows them to access devices
on the local network using domain names instead of IP addresses.
To allow user access to local network(s), select a network name in the
Selectable Address Objects list and click >> to add to the Selected
Address Objects list. You can select more than one network.
To block access to a network, select the network name in the Selected
Address Objects list and click <<.
Click Ok to save the changes and return to the main Access Privilege
screen.
Click Cancel to discard all changes and return to the main Access
Privilege screen.
Chapter 26 SSL VPN
519