The Ssl Global Setting Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Chapter 22 SSL VPN
Table 119 VPN > SSL VPN > Connection Monitor (continued)
LABEL
Outbound
(Bytes)
Action
Refresh

22.4 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following
screen. Use this screen to set the IP address of the ZyWALL (or a gateway device)
on your network for full tunnel mode access, enter access messages or upload a
custom logo to be displayed on the remote user screen.
Figure 239 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 120 VPN > SSL VPN > Global Setting
LABEL
Global Setting
Network
Extension IP
Address
Message
Login Message
386
DESCRIPTION
This field displays the number of bytes transmitted by the ZyWALL on
this connection.
Click the icon to terminate the connection of the user and delete
corresponding session information from the ZyWALL.
Click Refresh to update this screen.
DESCRIPTION
Specify the IP address of the ZyWALL (or a gateway device) for full
tunnel mode SSL VPN access.
Leave this field to the default settings unless it conflicts with another
interface.
Specify a message to display on the screen when a user logs in and an
SSL VPN connection is established successfully. You can enter up to 31
characters ("a-z", A-Z", "0-9") with spaces allowed.
ZyWALL USG 2000 User's Guide