Table 130 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL
OK
Cancel
26.3 The SSL Global Setting Screen
Click VPN > SSL VPN and click the Global Setting tab to display the following
screen. Use this screen to set the IP address of the ZyWALL (or a gateway device)
on your network for full tunnel mode access, enter access messages or upload a
custom logo to be displayed on the remote user screen.
Figure 349 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 131 VPN > SSL VPN > Global Setting
LABEL
Global Setting
Network
Extension Local
IP
SSL VPN Login
Domain Name
ZyWALL USG 2000 User's Guide
DESCRIPTION
Click Ok to save the changes and return to the main Access Privilege
screen.
Click Cancel to discard all changes and return to the main Access
Privilege screen.
DESCRIPTION
Specify the IP address of the ZyWALL (or a gateway device) for full
tunnel mode SSL VPN access.
Leave this field to the default settings unless it conflicts with another
interface.
Chapter 26 SSL VPN
495