The Port Statistics Screen - ZyXEL Communications UAG5100 User Manual

• Use the Detected Device screen
passively detected by the UAG.
• Use the Printer Status screen (see
connected statement printers.
• Use the VPN 1-1 Mapping screen (see
active users to which the UAG applied a VPN 1-1 mapping rule.
• Use the VPN 1-1 Mapping > Statistics screen (see
statistics for each of the VPN 1-1 mapping rules.
• Use the VPN Monitor > IPSec screen (see
active IPSec SAs.
• Use the UTM Statistics > App Patrol screen (see
data collection and view virus statistics
• Use the UTM Statistics > Content Filter screen (see
data collection and view content filter statistics.
• Use the Log > View Log screen (see
messages. You can change the way the log is displayed, you can e-mail the log, and you can also
clear the log in this screen.
• Use the Log > View AP Log screen (see
wireless AP log messages.
• Use the Log > Dynamic Users Log screen (see
dynamic guest account log messages.

7.2 The Port Statistics Screen

Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
Figure 64 Monitor > System Status > Port Statistics
Chapter 7 Monitor
(Section 7.16 on page
Section 7.17 on page
Section 7.18 on page
Section 7.19 on page
Section 7.20 on page
Section 7.22 on page
Section 7.22.1 on page
Section 7.22.2 on page
UAG Series User's Guide
92
116) to view the wireless devices
118) to view information about the
118) to view the status of the
Section 7.18.1 on page
120) to display and manage
121) to start or stop
Section 7.21 on page 123) to start or stop
125) to view the UAG's current log
127) to view the UAG's current
129) to view the UAG's
119) to display