The Port Statistics Screen - ZyXEL Communications UAG4100 User Manual

• Use the VPN 1-1 Mapping screen (see
users to which the UAG applied a VPN 1-1 mapping rule.
• Use the VPN 1-1 Mapping > Statistics screen (see
statistics for each of the VPN 1-1 mapping rules.
• Use the Log > View Log screen (see
messages. You can change the way the log is displayed, you can e-mail the log, and you can also
clear the log in this screen.
• Use the Log > View AP Log screen (see
wireless AP log messages.
• Use the Log > Dynamic Users Log screen (see
dynamic guest account log messages.

7.2 The Port Statistics Screen

Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
Figure 47 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 19 Monitor > System Status > Port Statistics
LABEL
Poll Interval
Set Interval
Stop
Switch to
Graphic View
#
Port
Chapter 7 Monitor
Section 7.17 on page
DESCRIPTION
Enter how often you want this window to be updated automatically, and click Set
Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
Click this to display the port statistics as a line graph.
This field displays the port's number in the list.
This field displays the physical port number.
UAG4100 User's Guide
Section 7.16 on page 97) to view the status of the active
Section 7.16.1 on page
99) to view the UAG's current log
Section 7.17.1 on page
Section 7.17.2 on page
75
98) to display
101) to view the UAG's current
103) to view the UAG's