Installation Overview For The Srx 210 Services Gateway - Juniper SRX 210 Services Hardware Manual

Chapter 4
Installation Overview for the SRX 210
Services Gateway

Installation Overview for the SRX 210 Services Gateway

This section includes the following topic:
Installation Overview for the SRX 210 Services Gateway on page 49
After you have prepared your installation site, you are ready to unpack and install
the services gateway. It is important to proceed through the installation process in
the following order:
Review the safety guidelines explained in "SRX 210 Services Gateway General
1.
Safety Guidelines and Warnings" on page 133.
Verify that you have prepared your site for the installation of the services gateway
2.
using the checklist available in "Site Preparation Checklist for the SRX 210
Services Gateway" on page 41.
Follow the instructions in "Unpacking the SRX 210 Services Gateway" on page
3.
51 to unpack the services gateway and verify that the parts are received.
Prepare the services gateway for installation as described in "Preparing the SRX
4.
210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation" on page 55.
Install the services gateway as described in "SRX 210 Services Gateway
5.
Installation" on page 60.
Connect cables to external devices as described in "Connecting Interface Cables
6.
to the SRX 210 Services Gateway" on page 69.
Connect the grounding cable as described in "Grounding the SRX 210 Services
7.
Gateway" on page 72.
Power on the services gateway as described in "Powering On and Powering Off
8.
the SRX 210 Services Gateway" on page 73.
Installation Overview for the SRX 210 Services Gateway
49