Juniper SRX 210 Services Hardware Manual page 117

Table 30: Configuring Basic Settings
Task
Navigate to the System level
in the configuration
hierarchy.
Define the hostname of the
device.
Name the domain in which
the device is located.
Allow SSH remote access.
Define root authentication
for access to the device.
NOTE: For readability, the
entire key is not shown.
Define the time zone the
device is located in.
Define the NTP server that
NTP requests can be sent to.
Chapter 10: Establishing Basic Connectivity for the SRX 210 Services Gateway
J-Web Configuration Editor
1. In the J-Web interface, select Configuration>View
and Edit> Edit Configuration.
2. Next to System, click Configure or Edit.
In the Host name box, type the hostname of the
device—for example, .
devicea
In the Domain name box, type the domain name of the
device—for example,
lab.device.net
1. In the Nested configuration section, next to Services,
click Configure or Edit.
2. Next to Ssh, click Configure or Edit.
3. Click OK.
4. Click OK a second time to return to the System level
in the configuration editor hierarchy.
1. In the Nested configuration section, next to Root
authentication, click Configure or Edit.
2. Next to SSH RSA, click Add New Entry.
3. In the Authorized key box, type the RSA
password—for example,
AAAAB3Nza...D9Y2gXF9ac==
root@devicea.lab.device.net
4. Click OK.
5. Click OK a second time to return to the System level
in the configuration editor hierarchy.
In the Time zone list, select the time zone for your
device—for example, America/Los_Angeles.
1. In the Nested configuration section, next to NTP, click
Configure or Edit.
2. Next to Server, click Add New Entry.
3. In the Address box, type the NTP server's IP
address—for example,
10.148.2.21
4. Click OK.
5. Click OK a second time to return to the System level
in the configuration editor hierarchy.
Configuring Basic Settings for the SRX 210 Services Gateway with a Configuration Editor
.
ssh-rsa
.
.
CLI Configuration Editor
From the [edit] hierarchy level,
enter
edit system
Set the hostname. For example:
set host-name devicea
Set the domain name. For
example:
set domain-name lab.device.net
Set remote access for SSH:
set services ssh
Set the root password. For
example:
set root-authentication ssh-rsa
ssh-rsa
AAAAB3Nza...D9Y2gXF9ac==
root@devicea.lab.device.net"
Set the time zone. For example:
set time-zone America/Los_Angeles
Set the address of the NTP server.
For example:
set ntp server 10.148.2.21
97