Chapter 12
Maintaining SRX 210 Services Gateway
Hardware Components
Required Tools and Parts for Maintaining the SRX 210 Services Gateway Hardware
Components
Related Topics
Routine Maintenance Procedures for the SRX 210 Services Gateway
Required Tools and Parts for Maintaining the SRX 210 Services Gateway Hardware Components
This section describes how to maintain the hardware components of the SRX 210
services gateway. This section includes the following topics:
Required Tools and Parts for Maintaining the SRX 210 Services Gateway Hardware
Components on page 113
Routine Maintenance Procedures for the SRX 210 Services Gateway on page 113
Maintaining the Cooling System Components of the SRX 210 Services
Gateway on page 114
Maintaining the SRX 210 Services Gateway Power Supply on page 114
The following tools and parts are required to maintain the hardware components of
the SRX 210 services gateway:
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade screw-blade screwdriver, approximately 1/8 in. (3 mm)
Phillips (+) screwdrivers, number–1 and number–2
Routine Maintenance Procedures for the SRX 210 Services Gateway on page 113
Maintaining the Cooling System Components of the SRX 210 Services
Gateway on page 114
Maintaining the SRX 210 Services Gateway Power Supply on page 114
For optimum performance of the SRX 210 services gateway, perform the following
preventive maintenance procedures regularly:
Inspect the installation site for moisture, loose wires or cables, and excessive
dust.
113