Management Access For The Srx 210 Services Gateway - Juniper SRX 210 Services Hardware Manual

Related Topics

Management Access for the SRX 210 Services Gateway

Telnet allows you to connect to the services gateway and access the CLI to execute
commands from a remote system. The Telnet command-line interface connections
are not encrypted and therefore can be intercepted.
NOTE: Telnet access to the root user is prohibited. You must use more secure
methods, such as SSH, to log in as
SSH provides the following features:
The SSH client software must be installed on the machine where the client application
runs. If the SSH private key is encrypted (for greater security), the SSH client must
be able to access the passphrase used to decrypt the key.
For information about obtaining SSH software, see
http://www.openssh.com
If you are using a JUNOScript server to configure and monitor devices, you can
activate cleartext access on the device to allow unencrypted text to be sent directly
over a Transmission Line Protocol (TCP) connection without using any additional
protocol (such as SSH, SSL, or Telnet). For more information about the JUNOScript
application programming interface (API), see the JUNOScript API Guide.
NOTE: Information sent in cleartext is not encrypted and therefore can be intercepted.
If the device is operating in a Common Criteria environment, see the Secure
Configuration Guide for Common Criteria and JUNOS-FIPS.
Related Topics
Chapter 10: Establishing Basic Connectivity for the SRX 210 Services Gateway
SRX 210 Services Gateway Basic Connectivity Overview on page 78
Loopback Address for the SRX 210 Services Gateway on page 83
Management Access for the SRX 210 Services Gateway on page 85
Allows you to connect to the device and access the CLI to execute commands
from a remote system
Encrypts traffic so that it cannot be intercepted (unlike Telnet)
Can be configured so that connections are authenticated by a digital certificate
Uses public–private key technology for both connection and authentication
.
SRX 210 Services Gateway Basic Connectivity Overview on page 78
Loopback Address for the SRX 210 Services Gateway on page 83
Built-In Ethernet Port for the SRX 210 Services Gateway on page 84
Management Access for the SRX 210 Services Gateway
.
root
http://www.ssh.com
and
85