Juniper SRX 210 Services Hardware Manual page 143

Services gateway
Hide thumbs Also See for SRX 210 Services:
Table of Contents

Advertisement

Table 34: Component LEDs on the Services Gateway (continued)
LED
State
Power LED
Green
Amber
Off
Mini-PIM LED
Green
Off
Related Topics
Chassis and Interface Alarm Messages on the SRX 210 Services Gateway
When the services gateway detects an alarm condition, it lights the red or yellow
alarm LED on the front panel as appropriate. To view a more detailed description of
the alarm cause, issue the
There are two classes of alarm messages:
Examples:
regress@jaky# run show chassis alarms
4 alarms currently active
Alarm time
2008-06-05 09:27:11 PDT
2008-06-05 09:27:11 PDT
Meaning
Indicates that the device is functioning
normally.
Indicates that the Power button has
been pressed and quickly released.
The device is gracefully shutting down.
Off indicates that the device is not
receiving power.
Indicates that the Mini-PIM is present
and detected by the device.
Indicates that the Mini-PIM is not
present or is not detected by the
device.
CLI on the SRX 210 Services Gateway on page 121
Chassis and Interface Alarm Messages on the SRX 210 Services
Gateway on page 123
Monitoring the SRX 210 Services Gateway Power System on page 125
Using the Reset Config Button on the SRX 210 Services Gateway on page 127
Changing the Reset Config Button Behavior on the SRX 210 Services
Gateway on page 127
Juniper Networks Technical Assistance Center on page 128
show chassis alarms
Chassis alarms—Indicate a problem with a chassis component such as the cooling
system or power supply.
Interface alarms—Indicate a problem with a specific network interface.
Class
Major
Major
Chassis and Interface Alarm Messages on the SRX 210 Services Gateway
Chapter 14: Troubleshooting the SRX 210 Services Gateway
Possible Causes and Corrective
Actions
Normal Condition. No action is
required.
Normal Condition. No action is
required.
Normal Condition. No action is
required.
Normal Condition. No action is
required.
See the topic about Monitoring the
Services Gateway using Chassis
Alarm Conditions.
CLI command.
Description
fe-0/0/6: Link down
fe-0/0/5: Link down
123

Advertisement

Table of Contents
loading

Table of Contents