Srx 210 Services Gateway Adsl 2+ Mini-Physical Interface Module; Adsl 2+ Mini-Physical Interface Module - Juniper SRX 210 Services Hardware Manual

Related Topics

SRX 210 Services Gateway ADSL 2+ Mini-Physical Interface Module

This section contains the following topic:

ADSL 2+ Mini-Physical Interface Module

The ADSL 2+ Mini-PIM provides a single physical interface to asymmetric digital
subscriber line (ADSL) network media types.
The ADSL Mini-PIM comprises of the following operational modes:
Figure 7 on page 29 shows the ADSL 2+ Mini-PIM front panel.
Figure 7: ADSL 2+ Mini-PIM Front Panel
Supported Standards
The ADSL 2+ Mini-PIM supports the following standards:
Chapter 2: SRX 210 Services Gateway Hardware Components and Specifications
SRX 210 Services Gateway T1/E1 Mini-Physical Interface Module on page 23
SRX 210 Services Gateway ADSL 2+ Mini-Physical Interface Module on page 29
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX 210
Services Gateway on page 116
Removing a Mini-Physical Interface Module from the SRX 210 Services
Gateway on page 117
Installing a Mini-Physical Interface Module in the SRX 210 Services
Gateway on page 118
ADSL 2+ Mini-Physical Interface Module on page 29
Annex A
Annex B
Annex M
SRX 210 Services Gateway ADSL 2+ Mini-Physical Interface Module
29