Verifying Parts Received With The Srx 210 Services Gateway; Preparing The Srx 210 Services Gateway For Rack-Mount, Desk-Mount, And Wall-Mount Installation - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway Hardware Guide
3.
Related Topics

Verifying Parts Received with the SRX 210 Services Gateway

The SRX 210 services gateway shipment package contains a packing list. Check the
parts in the shipment against the items on the packing list. The packing list specifies
the part numbers and descriptions of each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX 210 services gateway contains the chassis with installed
components, listed in Table 20 on page 52, and an accessory box, which contains
the parts listed in Table 21 on page 52.
NOTE: The parts shipped with your device can vary depending on the configuration
you ordered.
Table 20: Parts List for a Fully Configured SRX 210 Services Gateway
Component
Chassis, with 2xGE and 6xFE ports and a blank panel for slot
without Mini-PIM installed
Power supply adapter (60W for Low Memory and High
Memory or 150W for PoE)
3-Prong Power Cord
DB-9 to RJ-45 Adapter, Straight Through, 7 feet
Table 21: Accessory Parts List for the SRX 210 Services Gateway
Part
Juniper Networks Product Warranty
End User License Agreement
Getting Started Guide
52
Verifying Parts Received with the SRX 210 Services Gateway
Store the shipping box and packing material in case you need to return or move
the device at a later time.
Required Tools and Parts for Unpacking the SRX 210 Services
Gateway on page 51
Verifying Parts Received with the SRX 210 Services Gateway on page 52
Preparing the SRX 210 Services Gateway for Rack-Mount, Desk-Mount, and
Wall-Mount Installation on page 55
Installation Overview for the SRX 210 Services Gateway on page 49
Quantity
1
1
1
1
Quantity
1
1
1