Installing The Srx 210 Services Gateway; Srx 210 Services Gateway Safety Requirements, Warnings, And Guidelines; Required Tools And Parts For Installing The Srx 210 Services Gateway - Juniper SRX 210 Services Hardware Manual

Chapter 7

Installing the SRX 210 Services Gateway

SRX 210 Services Gateway Safety Requirements, Warnings, and Guidelines

Related Topics

Required Tools and Parts for Installing the SRX 210 Services Gateway

Related Topics
This section includes the following topics:
SRX 210 Services Gateway Safety Requirements, Warnings, and
Guidelines on page 59
Required Tools and Parts for Installing the SRX 210 Services Gateway on page 59
SRX 210 Services Gateway Installation on page 60
Removing and Installing Mini-Physical Interface Modules in the SRX 210 Services
Gateway on page 66
To avoid harm to yourself or the device as you install and maintain it, follow the
guidelines for working with and near electrical equipment, as well as the safety
procedures for working with devices. For a discussion of how to make the installation
site a safe environment and a list of safety warnings, see Related Topics. However,
providing an exhaustive set of guidelines for working with electrical equipment is
beyond the scope of this guide.
SRX 210 Services Gateway General Safety Guidelines and Warnings on page 133
SRX 210 Services Gateway Electrical Safety Guidelines and Warnings on page 150
Required Tools and Parts for Installing the SRX 210 Services Gateway on page 59
Preparing the SRX 210 Services Gateway for Wall-Mount Installation on page 57
General Site Guidelines for Installing the SRX 210 Services Gateway on page 43
To install the device, you need the following tools and parts:
Phillips (+) screwdriver, number–2
Tie wrap
SRX 210 Services Gateway Installation on page 60
Removing and Installing Mini-Physical Interface Modules in the SRX 210 Services
Gateway on page 66
SRX 210 Services Gateway Safety Requirements, Warnings, and Guidelines
59