Juniper SRX 210 Services Hardware Manual page 33

NOTE: The numbers in Figure 2 on page 13 correspond to the numbers in
Table 6 on page 13.
Figure 2: SRX 210 Services Gateway Front Panel Components
Table 6 on page 13 provides information about the front panel components of the
services gateway.
Table 6: SRX 210 Services Gateway Front Panel Components
Number Component
1 Alarm LED
Chapter 2: SRX 210 Services Gateway Hardware Components and Specifications
Location Description
Left side of the front The Alarm LED has the
panel following indicator colors:
Usage
The Alarm LED can be used
to gather information on
critical or major alarms or to
Red and steadily on
determine if the device is
indicates a critical
functioning normally.
alarm.
Amber and steadily on
indicates a major
alarm.
Off indicates that there
are currently no
alarms.
SRX 210 Services Gateway Front Panel
13