Juniper SRX 210 Services Hardware Manual page 148

SRX 210 Services Gateway Hardware Guide
The
configuration. The
configurations on the services gateway.
To return the function of the Reset Config button to its default behavior, remove the
config-button
Related Topics
Juniper Networks Technical Assistance Center
If you need assistance while troubleshooting a services gateway, open a support case
using the Case Manager link at
(within the United States) or 1-408-745-9500 (from outside the United States).
128
Juniper Networks Technical Assistance Center
user@host# set chassis config-button no-rescue
To disable the button and prevent the device from resetting to either
configuration, use the following command:
user@host# set chassis config-button no-clear no-rescue
option prevents the Reset Config button from loading the rescue
no-rescue
no-clear option prevents the Reset Config button from deleting all
statement from the device configuration.
Using the Reset Config Button on the SRX 210 Services Gateway on page 127
CLI on the SRX 210 Services Gateway on page 121
Monitoring the SRX 210 Services Gateway Components using LEDs on page 122
Chassis and Interface Alarm Messages on the SRX 210 Services
Gateway on page 123
Monitoring the SRX 210 Services Gateway Power System on page 125
Juniper Networks Technical Assistance Center on page 128
http://www.juniper.net/support/
, or call 1-888-314-JTAC