Juniper SRX 210 Services Hardware Manual page 196

SRX 210 Services Gateway Hardware Guide
Packing the SRX 210 Services Gateway Components for Shipment
Follow these guidelines for packing and shipping individual components of the
services gateway:
CAUTION: Do not stack any of the services gateway components during packing.
Related Topics
176
Packing the SRX 210 Services Gateway Components for Shipment
Return Procedure for the SRX 210 Services Gateway on page 169
When you return a component, make sure that it is adequately protected with
packing materials and packed so that the pieces are prevented from moving
around inside the carton.
Use the original shipping materials if they are available.
Place individual Mini-Physical Interface Modules (Mini-PIMs) in electrostatic bags.
Write the Return Materials Authorization (RMA) number on the exterior of the
box to ensure proper tracking.
Required Tools and Parts for Packing the SRX 210 Services Gateway on page 174
Packing the SRX 210 Services Gateway for Shipment on page 175
Return Procedure for the SRX 210 Services Gateway on page 169