Srx 210 Services Gateway Laser And Led Safety Guidelines And Warnings; Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway Hardware Guide
Related Topics

SRX 210 Services Gateway Laser and LED Safety Guidelines and Warnings

The 1-Port SFP Mini-Physical Interface Module (Mini-PIM) is equipped with laser
transmitters, which are considered a Class 1 Laser Product by the U.S. Food and
Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1
+A11 +A2 requirements.
Observe the following guidelines and warnings:

Laser and LED Safety Guidelines and Warnings

General Laser Safety Guidelines

When working around Mini-PIMs, observe the following safety guidelines to prevent
eye injury:
WARNING: Unterminated optical connectors can emit invisible laser radiation. The
lens in the human eye focuses all the laser power on the retina, so focusing the eye
directly on a laser source—even a low-power laser—could permanently damage the
eye.
142
SRX 210 Services Gateway Laser and LED Safety Guidelines and Warnings
Juniper Networks services gateway måste installeras i en ställning som är
förankrad i byggnadens struktur.
Om denna enhet är den enda enheten på ställningen skall den installeras längst
ned på ställningen.
Om denna enhet installeras på en delvis fylld ställning skall ställningen fyllas
nedifrån och upp, med de tyngsta enheterna längst ned på ställningen.
Om ställningen är försedd med stabiliseringsdon skall dessa monteras fast innan
enheten installeras eller underhålls på ställningen.
SRX 210 Services Gateway Fire Safety Requirements on page 137
SRX 210 Services Gateway Laser and LED Safety Guidelines and
Warnings on page 142
Laser and LED Safety Guidelines and Warnings on page 142
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.