Juniper SRX 210 Services Hardware Manual page 47

Figure 6: 1-Port SFP Mini-PIM Front Panel
Supported 1-Port SFP Modules
You can customize the Ethernet interface type by using different 1-Port SFP modules.
Table 11 on page 27 shows the available 1-Port SFP modules.
Table 11: 1-Port SFP Mini-Physical Interface Modules
Product Number
JX-SFP-1GE-LX
JX-SFP-1GE-SX
JX-SFP-1FE-FX
JX-SFP-1000BASE-T
Key Features
The 1-Port SFP Mini-PIM has the following key features:
NOTE: The 1-Port SFP Mini-PIM with Gigabit Ethernet connector provides 1000 Mbps
link speed. Actual bandwidth is limited to 100 Mbps.
Chapter 2: SRX 210 Services Gateway Hardware Components and Specifications
Interface Type
GbE SFP, LC connector, LX transceiver
GbE SFP, LC connector, SX transceiver
100BASE-SX
100BASE-LX
1000BASE-T SFP
Enables you to install and remove transceivers without powering down the device
Provides real-time visual status of connectivity and traffic flows
Provides Link Up/Down alarm
Supports different transceiver types
SRX 210 Services Gateway 1-Port SFP Mini-Physical Interface Module
Connector
LC
LC
LC
RJ-45
27