Juniper SRX 210 Services Hardware Manual page 118

SRX 210 Services Gateway Hardware Guide
Table 30: Configuring Basic Settings (continued)
Task
Define the DNS server that
receives DNS requests.
Add each domain to which
the device belongs.
Define the backup device to
be used when the device is
starting up or the routing
protocol processes are not
running.
Define the IP address for
.
Io0.0
Related Topics
98
Configuring Basic Settings for the SRX 210 Services Gateway with a Configuration Editor
J-Web Configuration Editor
1. Next to Name server, click Add New Entry.
2. In the Address box, type the address of the DNS
server—for example, 10.148.2.32
3. Click OK.
1. Next to Domain search, click Add New Entry.
2. In the Value box, type the name of the domain in
which the device is located—for example,
.
lab.device.net
3. Click OK.
4. Next to Domain search, click Add New Entry.
5. In the Value box, type the name of another domain
that the device belongs to—for example,
6. Click OK.
In the Backup device section, next to Address, type the
IP address of the backup device—for example,
192.168.2.44 .
1. In the configuration editor hierarchy, next to
Interfaces, click Configure or Edit.
2.
In the Interface table, locate the
Unit.
3. In the Unit table, click 0, and in the Family section
next to Inet, click Configure or Edit.
4. To delete the existing IP address, click Discard. Select
the Delete Configuration Below This Point option
button from the next display.
5. Next to Address, click Add new entry.
6. In the Source box, type the address and prefix length
for the loopback interface—for example,
.
172.16.1.24/32
7. Click OK.
SRX 210 Services Gateway Basic Connectivity Overview on page 78
Connecting an SRX 210 Services Gateway to the J-Web Interface on page 86
Connecting an SRX 210 Services Gateway to the CLI Locally on page 88
Connecting an SRX 210 Services Gateway to the CLI Remotely on page 90
Displaying Basic Connectivity Configurations for the SRX 210 Services
Gateway on page 99
CLI Configuration Editor
Set the address of the DNS server.
For example:
.
set name-server 10.148.2.32
Set the domains to be searched.
For example:
set domain-search lab.device.net
set domain-search device.net
device.net .
Set the address for the backup
device. For example:
set backup device address
192.168.2.44
1. From the
enter
Io0 row and click
edit interfaces
2. Delete the existing IP address:
delete Io0 unit 0 family inet
address
3. Set the IP address and prefix
length of
set Io0 unit 0 family inet
address 172.16.1.24/32
[edit] hierarchy level,
. For example:
Io0.0