Juniper SRX 210 Services Hardware Manual page 114

SRX 210 Services Gateway Hardware Guide
1.
2.
3.
4.
NOTE: After initial configuration is complete, the SRX 210 services gateway stops
functioning as a DHCP server. If you change the IP address of
the management device configured to use DHCP, you lose your DHCP lease and your
connection to the services gateway through the J-Web interface. To reestablish a
connection, either set the IP address on the management device manually or connect
ge-0/0/0
way—for example, through the console port.
Table 28: Quick Configuration Set Up Summary
Field Function
Identification
Host Name (required) Defines the hostname of the services gateway.
Domain Name Defines the network or subnetwork that the
services gateway belongs to.
Root Password Sets the password that user
(required) into the services gateway.
Verify Root Password Verifies the root password has been typed
(required) correctly.
Time
Time Zone Identifies the time zone in which the services
gateway is located.
94
Configuring Basic Settings for the SRX 210 Services Gateway with J-Web Quick Configuration
Connect a management device to the
Select Configuration>Quick Configuration >Set Up if the Quick Configuration
Set Up page is not displayed.
Enter information into the Quick Configuration Set Up page, as described in
Table 28 on page 94.
Click one of the following buttons:
Click Apply to apply the configuration and remain on the Quick Configuration
Set Up page.
Click OK to apply the configuration and return to the Quick Configuration
page.
Click Cancel to cancel your entries and return to the Quick Configuration
page.
to the management network and access the services gateway another
can use to log
root
interface on port
ge-0/0/0
ge-0/0/0
Your Action
Type the hostname.
Type the domain name.
Type a plaintext password that the system encrypts.
NOTE: After a root password has been defined, it is
required when you log into the J-Web user interface
or the CLI.
Retype the password.
From the list, select the appropriate time zone.
.
0/0/0
and have