Juniper SRX 210 Services Hardware Manual page 98

SRX 210 Services Gateway Hardware Guide
SRX 210 Services Gateway Basic Connectivity Overview
The JUNOS software is preinstalled on the services gateway. When the device is
powered on, it is ready to be configured.
If you are setting up a services gateway for the first time, you can use either J-Web
Quick Configuration or a configuration editor to configure basic connectivity.
If you are setting up many s, autoinstallation can help automate the configuration
process.
Before you configure the services gateway for the first time, you should complete
the following prerequisite tasks:
Table 22: Services Gateway Prerequisite Tasks
Task
Gather the information on:
If you are performing the initial configuration with the J-Web
interface, gather the following equipment:
If you are performing the initial configuration with the CLI,
gather the following equipment:
78
SRX 210 Services Gateway Basic Connectivity Overview
Details
Device identification
Hostname for the device on the network
Domain that the device belongs to on the network
Password for the root user
Time zone information
System time and zone for services gateway location
IP address of a Network Time Protocol (NTP) server,
if NTP is used to set the time on the services
gateway
Network settings for the services gateway:
IP address of a DNS server
List of domains that can be appended to hostnames
for DNS resolution
IP address of the default gateway
IP address to be used for the loopback interface.
IP address of the built-in Ethernet port that you will use
for management purposes. For example, use the
interface
ge-0/0/0
Management device, such as a laptop, with an Ethernet
port
Ethernet cable (provided)
Management device, such as a PC or laptop, with a serial
port and an asynchronous terminal application (such as
Microsoft Windows HyperTerminal)
Ethernet cable (provided)
For a remote connection, gather the following equipment:
Two dial-up modems
An adapter appropriate for your modem (not
provided)