Displaying An Ssl Certificate Configuration For The Srx 210 Services Gateway - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway Hardware Guide
Table 33: Configuring a Secure Web Access
Task
Navigate to the Security
level in the configuration
hierarchy.
Import the SSL certificate
that you have
generated—for example,
new .
Enable HTTPS access and
specify the SSL certificate
to be used for
authentication.
Specify the port on which
HTTPS access is to be
enabled—for example, TCP
port 8443.
NOTE: You can enable
HTTPS access on specified
interfaces also. If you
enable HTTPS without
specifying an interface,
HTTPS is enabled on all
interfaces.
Related Topics
Verifying Secure Web Access for the SRX 210 Services Gateway
To verify that the SRX 210 services gateway has the secure access settings you
configured, perform the following tasks:
Related Topics
108
Verifying Secure Web Access for the SRX 210 Services Gateway
J-Web Configuration Editor
1. In the J-Web interface, select
Configuration>View and Edit>Edit
Configuration.
2. Next to Security, click Configure or Edit.
1. Next to , click Configure.
Certificates
2. Next to , click Add new entry.
Local
3. In the Name box, type a name for the
certificate to be imported—for example,
.
new
4. In the Certificate box, paste the generated
SSL certificate and private key.
5. Click OK.
1. On the main Configuration page next to
System, click Configure or Edit.
2. Select the Services box and click Edit next
to it.
3.
Next to Web management
4. Select the Https box and click Edit next
to it.
5. In the Local certificate box, type the name
of the certificate—for example,
6. In the Port box, type 8443
7. Click OK.
Verifying Secure Web Access for the SRX 210 Services Gateway on page 108
Generating SSL Certificates for the SRX 210 Services Gateway on page 104
Configuring Secure Access to the J-Web Interface for the SRX 210 Services
Gateway on page 105
Display an SSL certificate configuration.
Display a secure access configuration.
Displaying an SSL Certificate Configuration for the SRX 210 Services
Gateway on page 109
CLI Configuration Editor
From the [edit]
edit security
Enter
set certificates local new load-key-filepath
Replace path with a path or URL to the file
containing an SSL certificate and private key
in PEM format—for example,
/var/tmp/new.pem
From the
[edit system]
set services web-management https
local-certificate new port 8443
, click Edit.
.
new
.
hierarchy level, enter
hierarchy level, enter