Juniper SRX 210 Services Hardware Manual page 26

SRX 210 Services Gateway Hardware Guide
Table 4: SRX 210 Services Gateway Software Features and Licenses
Feature SRX 210 Services Gateway Feature
Category
Routing and Open Shortest Path First (OSPF)
Multicast
Border Gateway Protocol (BGP)
Routing Information Protocol version 1 (RIPv1) and version 2 (RIPv2)
Static routes
Intermediate System-to-Intermediate System (IS-IS)
Connectionless Network Services (CLNS):
NOTE: CLNS is available only in packet-based mode.
End System-to-Intermediate System (ES-IS) protocol
IS-IS extensions
BGP extensions
Static routes
Multiprotocol Label Switching (MPLS):
NOTE: MPLS is available only in packet-based mode.
Layer 2 and Layer 3 virtual private networks (VPNs)
VPN routing and forwarding (VRF) table labels
Traffic engineering protocols such as Label Distribution Protocol (LDP) and Resource Reservation
Protocol (RSVP)
NOTE: Security features cannot be configured when MPLS/IPv6 is used.
Multicast:
Internet Group Management Protocol (IGMP)
Protocol Independent Multicast (PIM)
Distance Vector Multicast Routing Protocol (DVMRP)
Single-source multicast
Internet IPv4
Protocols
IPv6 routing and forwarding
IP Address Static addresses
Management
Dynamic Host Configuration Protocol (DHCP)
6
SRX 210 Services Gateway Software Features and Licenses