T1/E1 Mini-Physical Interface Module - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway T1/E1 Mini-Physical Interface Module

T1/E1 Mini-Physical Interface Module

The T1/E1 Mini-Physical Interface Module (Mini-PIM) provides the physical connection
to T1 or E1 network media types and also performs T1 or E1 framing and line-speed
signaling.
Figure 5 on page 23 shows the T1/E1 Mini-PIM front panel.
Figure 5: T1/E1 Mini-Physical Interface Module Front Panel
Supported Standards
The T1/E1 Mini-PIM supports the following standards:
Chapter 2: SRX 210 Services Gateway Hardware Components and Specifications
SRX 210 Services Gateway ADSL 2+ Mini-Physical Interface Module on page 29
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX 210
Services Gateway on page 116
Removing a Mini-Physical Interface Module from the SRX 210 Services
Gateway on page 117
Installing a Mini-Physical Interface Module in the SRX 210 Services
Gateway on page 118
T1/E1 Mini-Physical Interface Module on page 23
ANSI TI.107, TI.102
GR 499-core, GR 253-core
AT&T Pub 54014
ITU G.751, G.703
SRX 210 Services Gateway T1/E1 Mini-Physical Interface Module
23