Juniper SRX 210 Services Hardware Manual page 83

Figure 10: Vertical Installation of the SRX 210 Services Gateway on a Desk
2.
Installing the SRX 210 Services Gateway on a Wall
You can install the SRX 210 services gateway on a wall. The device is shipped with
rubber feet in the accessory box. The rubber feet help stabilize the device on the
wall and enhance airflow. The mounting brackets are an optional accessory.
To install the device on a wall:
1.
2.
3.
Place the chassis on the desk with the stand side facing the desk.
Turn the chassis upside down on a desk or work surface near where you intend
to operate the device.
Attach the provided rubber feet to the bottom of the chassis.
Position a mounting bracket on each side of the chassis as shown in
Figure 11 on page 64.
Chapter 7: Installing the SRX 210 Services Gateway
Installing the SRX 210 Services Gateway on a Wall
63