Srx 210 Services Gateway Front Panel - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway Hardware Guide
Table 6: SRX 210 Services Gateway Front Panel Components (continued)
Number Component
7 ExpressCard LED
8 Power button
9 Reset Config button
16

SRX 210 Services Gateway Front Panel

Location Description
Left side of the front The ExpressCard LED has
panel the following indicator
colors:
Left side of the front The power button powers
panel the device on and off.
Recessed in the left side The Reset Config button
of the front panel returns the device to the
default configuration.
Usage
This LED provides
information on the
functioning of the
ExpressCard slot.
Green and steadily on
indicates that the
ExpressCard is plugged
in and data call is
established.
Red and steadily on
Indicates that the
ExpressCard
plugged in is
faulty or not
detected by the
device.
Indicates that the
ExpressCard is
plugged in but not
registered with
the Network.
Yellow and steadily on
indicates that the
ExpressCard is plugged
in and registered with
the Network.
Off indicates that the
ExpressCard is not
plugged in.
The power button has status
indicators on the front panel
that indicate whether the
power supply is functioning
normally.
The Reset Config button is
used to remove the current
configuration and reset the
device to the default
configuration.
The button is recessed in the
front panel to prevent it from
being pressed accidentally.
Pressing and holding the
Reset Config button for 15
seconds or more deletes all
configurations on the device
and loads and commits the
factory configuration.