Juniper SRX 210 Services Hardware Manual page 48

SRX 210 Services Gateway Hardware Guide
LEDs
The SFP socket has two LEDs located to the right of the socket. Table 12 on page 28
shows the LED states.
Table 12: 1-Port SFP Mini-PIM LED States
LED Color Indication
LINK Green
ACT Green
Specifications
Table 13 on page 28 describes the physical specifications of the 1-Port SFP Mini-PIM.
Table 13: 1-Port SFP Mini-PIM Physical Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Network Interface Specifications
Specification
Network interface specifications
28
SRX 210 Services Gateway 1-Port SFP Mini-Physical Interface Module
Status
On steadily
Off
Blinking
Off
Value
0.80" H x 3.75" W x 5.9" L
(2.0 cm x 9.5 cm x 14.5 cm )
0.21 lb (97 g)
SFP
Mini-PIM
1 Port SFP Specification
Full-duplex and half-duplex mode
Maximum transmission units (MTUs) of up to 1518 bytes
802.1q virtual LANs (VLANs) support
Class-of-Service support
Encapsulations DIX, LLC/SNAP, CCC, TCC & VLAN-CCC
Loopback diagnostic feature
Description
Port is online
Port is offline
Port is receiving or sending data
Port might be on, but is not receiving or
sending data