Installation Overview; Installation Overview For The Srx210 Services Gateway; Table 27: Installation Process Order For The Srx210 Services Gateway - Juniper SRX210 Series Manual

CHAPTER 10

Installation Overview

Installation Overview for the SRX210 Services Gateway

Copyright © 2012, Juniper Networks, Inc.
Installation Overview for the SRX210 Services Gateway on page 77
Required Tools and Parts for Installing and Maintaining the SRX210 Services
Gateway on page 78
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 27 on page 77.

Table 27: Installation Process Order for the SRX210 Services Gateway

Step Task
1 Review the safety guidelines
explained.
2 Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
3 Unpack the services gateway and
verify that the parts are received.
4 Prepare the services gateway for
installation.
5 Install the services gateway.
6 Connect cables to external devices.
For more information, see
"SRX210 Services Gateway General
Safety Guidelines and Warnings" on
page 47
"Site Preparation Checklist for the
SRX210 Services Gateway" on
page 37
"Unpacking the SRX210 Services
Gateway" on page 81
"Preparing the SRX210 Services
Gateway for Rack-Mount,
Desk-Mount, and Wall-Mount
Installation" on page 85
Installing the SRX210 Services
Gateway in a Rack on page 95
Installing the SRX210 Services
Gateway on a Desk on page 99
Installing the SRX210 Services
Gateway on a Wall on page 100
"Connecting and Organizing Interface
Cables to the SRX210 Services
Gateway" on page 106
77